Network Configuration
How to Configure a Network
In this section you will learn how to configure a network, peer to peer, client server, workstation, server, basic data communication.
Peer to Peer network model
Before configuring a computer network, you have to decide that, which networking model you require. There are two main types of network models. Peer to peer and client-server network model. In the peer to peer network model you simply use the same Workgroup for all the computers and a unique name for each computer.
Additionally, you will have to give a unique IP address of the same class A, B, or C for all the computers in your network and its related subnet mask e.g if you decide to use class A IP address for your three computers in your Peer to Peer network then your IP address/Subnet mask settings can be as follows.
Computer Name IP Address Subnet Mask Workgroup
PC1 100.100.100.1 255.0.0.0 Officenetwork
PC2 100.100.100.2 255.0.0.0 Officenetwork
PC3 100.100.100.3 255.0.0.0 Officenetwor
Please note that the above example is for only illustration purpose so you can choose any IP address, computer name and workgroup name of your interest.
For doing this right click on My Computer and then click Properties then go to the Network Identification section and set these.
In a peer to peer network all computers acts as a client because there is not centralized server. Peer to peer network is used where not security is required in the network.
If a computer fails to work then all other computers work normally in peer to peer network.
Client/Server Network Model
In the client/server network model a computer plays a centralized role and is known as a server all other computers in the network are known as clients. All client computers access the server simultaneously for files, database, docs, spreadsheets, web pages and resources like hard diver, printer, fax modem, CD/DVD ROM and others. In other words, all the client computes depends on the server and if server fails to respond or crash then networking/communication between the server and the client computes stops.
If you want to configure a client-server network model then first prepare the server. Install Windows 2000 or Windows 2003 Server from the CD on the server computer and make a domain. You can create a domain by this command on the Run “DCPROMO”. You can give this command once you install the server successfully. After you give the DCPROMO command you will be asked for a unique domain name. All the client computers will use the same unique domain name for becoming the part of this domain. This command will install the active directory on the server, DNS and other required things. A step by step wizard will run and will guide you for the rest of the steps. Make sure that a network cable is plugged in the LAN card of the server when you run the DCPROMO.exe command.
When the Active directory is properly installed on the server, restart the server. You can create network users on the server computer and also name/label the network resources like computers/printers etc.
Once you install the server successfully now come to the client computers. Install Windows 2000 professional on your all client computers. Once you install the Windows 2000 professional on the clients the next step is to make this computer (client computer) a part of the network.
Configuration Steps
1. Choose a unique name for each client computer
2. Choose unique IP address for each computer and relevant.
3. Use the same domain name for all client PCs.
Network/System administrators are required to do these administrative tasks on the server and client computers. Any shared resources on the network either on the server or the clients can be access through the My Network Places in the Windows 2000 platform. There is another way to connect to the shared resources by giving this command in the run \\ComputerName\SharedDriveLetter.
Network configurations steps can be implemented by right clicking the My Computer>Properties>
For giving the IP address you will have to right click on the My Network places>properties>Local Area Connection>Properties>Internet Protocols (TCP/IP)>Properties and then give the IP address and subnet mask of the same range and class for all the computers in the network.
Communication Device
Introduction to the Network Communication Devices
In this tutorial you will learn get the basic introduction to network devices such as nic adapters, routers, hubs, switches, modems, communication cables, lan/wan routers, gateway and other devices. A network is consists of a larger number of the communication devices. The simplest device that is used in the communication is the NIC adapter which is attached with the every computer in a network. If you want to build a LAN, you will need to have computers, hubs, switches, network adapters, UTP/STP cables, routers, internal/external modems, connectors, cable testers and clipping tool.
On the other hand if you need to build WAN, you will need to have routers, switches, dedicated or leased telephone lines such as ISDN lines, frame relay connection and other types of wan communication connections.
There are different communication mediums such as Ethernet cables, copper wire, coaxial cable, fiber optic cables, leased telephone lines and ever air is also a communication medium for the satellite communication. The most common networking medium is the LAN is the Ethernet cable (UTP/STP), which is used in the star topology. Hub is a central device of a network and every computer in a network is directly connected with the hub. If the hub fails to work, the communication between the computers stops till the hub again starts working. Hub broadcasts the data to its every port, and then finding the destined computer, the data sent toward it. The switch is an advance form of the hub similar in functions but the advanced switches has a switching table in them. A advanced switch stores the MAC address of every attached computer and the data is only sent to the destined computer, unlike the hubs where data is sent to all ports. A router is a key device in the internet communication and wan communication system. A router has software called routing table and the source and destination addresses are stored in the routing table.
A router connects two logically and physically different networks. Router finds the IP address of the next hop (next router) and the data is sent toward it and so on. The well known routers developing companies are Cisco systems, Nortel, DLink and others. Every ISP, banks, corporate offices and multinational companies use routers for LAN and WAN communications and communication in their private networks. A gateway can be device or software in a network.
A gateway device connects the LAN with the internet. A gateway is directly exposed to the internet so it should be securely configured and in and out traffic should be monitored. If you are using DSL connection, you must need a DSL modem in your network. The telephone line is connected with the DSL modem and UTP/STP cable attaches your computer with the DSL modem. Modems are the devices that are used to modulate and demodulate the data. They convert analogue signals to digital and digital signals to analogue so that signals can travel on the telephone lines.
There are certain types of the cables that are used to connect two or more computers in a network. Fiber optic cable acts as a backbone between the ISPs and corporate offices. Data travels at the speed of light on the fiber optic cables. The cost and the installation cost of the fiber optic cable is very high but it is becoming very popular in the home networking and LANs also. In the local area networking, 10baseT/CAT5 cable is most commonly in use.
A server is a computer in network that provides services to the client computers such as logon requests processing, files access and storage, internet access, printing access and many other types of services. Servers are mostly equipped with extra hardware such as plenty of external memory (RAM), more data store capacity (hard disks), high processing speed and other features.
This further emphasizes, I hope, the importance of the word "twist" in making network cables which will work. You cannot use an flat-untwisted telephone cable for a network cable. Furthermore, you must use a pair of twisted wires to connect a set of transmitter pins to their corresponding receiver pins. You cannot use a wire from one pair and another wire from a different pair.
